AIR RIFLE SCOPE 4 x 20

SIGHT STRUCTURE TECHNICAL DATA:

Magnification: Fixed 4 zoom

Length: 276 mm

Weight: 117 g with the original mount.

Lens diameter: 25 mm

tube diameter: 20 mm

Cross-hairs of the "8" type similar to duplex cross-hairs

SIGHT MECHANICAL DATA

The turrets are graduated in ¼ of MOA



which corresponds to 7 mm at 100 meters per click or 0.7 mm per click at 10 meters.

Using a rule of 3 allows you to find intermediate values.



The adjustment is carried out using a coin or a flat screwdriver.

ADJUSTING THE SCOPE TO YOUR VISION

- Aim at a white wall and observe the cross-hairs on your scope sight. They should appear sharply defined. If not, hold the eyepiece (the part closest to your eyes) and turn it carefully. This adjustment focuses the cross-hairs in accordance with your vision.

- Once you have found the position where the cross-hairs appear well-defined, tighten the locknut situated between the zoom ring and eyepiece to prevent the eyepiece from being moved unintentionally.

HOW TO ADJUST YOUR SCOPE TO SHIFT THE POINT OF IMPACT

- Unscrew the protective caps on the turrets.



- The upper turret adjusts the height (vertical axis) of your point of impact, and is marked UP to indicate the direction for raising your point of impact. (Turn anti-clockwise)



- The turret situated on the right-hand side of your scope sight adjusts in the horizontal axis, and is marked R (Right) to shift your point of impact further to the right. (Turn anticlockwise)