26" - 27.5" - 29" Front/Rear Rigid Mountain Bike Mudguard Kit V2 - Black
Store Availability
Store availability
BENEFITS
Compatibility
This kit fits 26" to 29" mountain bikes with a telescopic fork
Easy assembly / dismantling
Fits to its screwed-on brackets in just one click and keeps its position setting
Non-messy
This kit effectively protects your lower back, chest and face from muddy spray
Weight
Front weight: 120 g Rear weight: 230 g TOTAL: 350g
Instructions
Download it hereTECHNICAL INFORMATIONS
LEVEL OF PROTECTION
This wide, shock-resistant mudguard kit stops mud getting sprayed onto the rider's lower back, chest and face.
For best results, position the rear mudguard blade as close as possible (2 to 3 cm) to the wheel.
You can't completely avoid muddy splatters when it's damp...
But for getting from A to B, we recommend using a hybrid bike mudguard kit (with longer blades that are closer to the wheels), if compatible with your bike frame and tyre width.
Bike compatibility
This kit is suitable for 26" to 29" mountain bikes, with a tyre width up to 2.8" in 27.5" and 2.6" in 29", equipped with a telescopic fork.
To ensure a good fit at the front, the internal diameter of the steerer tube must be between 18 and 34 mm.
To ensure a good fit at the rear, the diameter of the seat post must be between 25.4 and 34.9 mm.
BOX CONTENTS
The front mudguard comes fully assembled and ready to be mounted, with a 23 mm medium expansion socket.
To make this product compatible with as many different suspension forks as possible, there are 2 additional expansion plugs included in this kit (a smaller 18 mm one, and a bigger 31 mm one). The rear mudguard comes fully assembled and ready to be mounted, no matter the diameter of your seat post.
A MODERN, EFFICIENT DESIGN
With dimensions that fit all the new wheel and tyre sizes on the market, and with a bold design, our mudguard kit gives your bike a modern, dynamic look.
Everything has been designed to give you the best experience:
- A reliable screw-on bracket that holds the mudguards in the same position each time
- An easy system to clip the blades onto and take them off your bike depending on the weather
- Compatibility with accessories (camera, lights)
COMPATIBLE ACCESSORIES
In dry weather, when there's no rain and mud about, you can unclip the blade from the rear bracket and clip a sports camera on instead. The camera must be compatible with the GoPro bracket system.
To keep you safe when riding early in the morning or late at night, there's a rail at the end of the rear blade that you can clip a rear, red light to: CL 100, CL 500, CL 900, ST 500 or RL 510 LED.
Dimensions and weight
Front:
Blade length: 553 mm
Blade width: 73 to 97 mm
Total weight: 120 g
Rear:
Blade length: 497 mm
Blade width: 73 to 95 mm
Total weight: 230 g
COMPOSITION
composition
Mudguard: 5.75% Polyoxymethylene, 7.38% Polyamide, 3.16% Glass Fiber, 67.41% Polypropylene, 13.74% Thermo Polymer Elastomer, 2.56% Steel
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Restrictions on use
Not suitable for bikes with a rigid fork
TESTS AND WARRANTY
Warranty
2 Years
Videos
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 42% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.
-
PlasticRecycled PP
Product made from 64% recycled polypropylene
Using recycled polypropylene rather than conventional polypropylene reduces the CO2 emissions linked to the material by at least 42%.