4 Man Tent - MH100
Store Availability
Store availability
BENEFITS
Easy assembly / dismantling
Free-standing structure. Easy pitching with poles
Easy transport
Dimensions of the cover: 59 cm x 20 cm x 18 cm / 21 L. Weight: 4,65 kg
Capacity
260 x 210 cm bedroom. Max. useful height: 137 cm. Surface area: 6 sqm
Waterproof
Waterproofing (Schmerber): Flysheet > 2000 mm. Ground sheet > 2400 mm
Heat reduction
Fly sheet and vents. Not equipped with Fresh technology
Darkness
Not equipped with Black technology
Wind resistance
Resists winds of 35 km/h (Force 5): Tested against gusts on a rotating platform
TECHNICAL INFORMATIONS
Pitching and striking the tent
This tent has a classic dome structure.
All you have to do is fit the tent poles with the bedroom, and then fit the flysheet on top.
To strike the tent, the process is the same, but in reverse.
If it is windy it is advisable to attach the guy ropes that are provided in the tent bag.
Mattress compatibility
Recommended tent with a self-inflating mattress or trekking mattress up to 65 cm wide.
We do not recommend using inflatable mattresses, that are more than 8 cm thick, in this tent.
Indeed, this greatly reduces the volume inside the tent and increases condensation inside.
Ventilation of the tent
So that air can flow and be replaced between the bedroom and the flysheet, and eliminate the natural condensation as much as possible, the tent has 1 air vent at the top, 2 air vents at the sides and 1 inner door with a mesh upper section.
Waterproofing of the tent
All our tents are validated in the laboratory and in the field to guarantee the waterproofing.
To do this, we put the entire tent under a 200 L/h shower for 3 hours.
The flysheet is made of 2000mm Schmerber PU-coated polyester and the groundsheet is made of 120g/m² polyethylene. All the seams are sealed with thermobonded tape.
Wind resistance
We test all our tents in a wind tunnel on a turntable to expose each side to the wind. A well-assembled tent with all the guy ropes properly deployed around it should remain habitable with a wind speed measured at 35 km/h near the ground (Force 5).
What does my product contain?
- 1 bedroom
- 1 waterproof flysheet
- 2 poles
- 12 tent pegs
- 4 guy ropes
- 1 cover
Warranty of your tent
This camping tent was designed for occasional outdoor use (4 weeks per year) during your camping trips or in the countryside.
Continuous exposure to UV light over a period of several weeks can damage its textile part.
Our tents are not classified as “garden furniture” and aren’t designed to be left outdoors permanently.
To maximise the lifetime of your tent, it's important to store it properly when it is not being used.
3-year guarantee.
Don't throw away, repair!
Our tents are great for camping at night.
Over time, they age and some parts may wear out or break.
To facilitate repairs, we keep a stock of parts (tent poles, flysheets, bedrooms, etc.) so that they can be easily replaced.
Don't throw away, repair !
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie.
This location is a place where our teams (designers, product managers, engineers, etc.) can meet with outdoor sports enthusiasts.
A significant advantage for designing high-quality products and giving you access to all our expertise.
Where do our tents come from?
Created in our international design centre at the foot of the Mont Blanc in France, this tent is then manufactured and assembled by our suppliers in China, Vietnam and Bangladesh.
These are partners that have genuine expertise in making our tents and with whom we are in close collaboration.
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.
COMPOSITION
composition
Main fabric: 75.0% Polyester, 25.0% Polyethylene; Pole: 100.0% Glass Fiber; Picket: 100.0% Steel
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Storage: after use or cleaning, wait until the tent is perfectly dry before putting it away in order to avoid bad smells and mould.
Restrictions on use
Sleeping width: max. 65 cm per person.
TESTS AND WARRANTY
Test product
Our partner laboratories, as well as our own, contribute to the innovation and development of our Quechua tents. Extensive analysis and experience allow us to guarantee the technical nature of these products (wind resistance, waterproofing).
Agree by
To meet your requirements, Quechua tents are tested in the conditions that you may encounter during your nights in camping or in the wilderness. Our teams, plus a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market. This allows us to guarantee a high-quality tent.
Parts guarantee
3 YEARS. REPAIRS: All our tents can be repaired in the workshop of your local Decathlon store.
Videos
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessGreige (undyed)
Product made from 30% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 58% compared to conventional dyeing.
-
ProcessBiton
Product made from 50% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 60% compared to conventional dyeing.
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 12% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.
-
ProcessDope dyed
Product made from 14% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.