INFLATABLE STAND-UP PADDLE BOARD I SIZE S 8'
Store Availability
Store availability
BENEFITS
Easy transport
Light and compact, it can be folded easily and carried in its bag.
Weight
6.5 kg! You can easily carry your board, whether it is inflated or folded.
Stability
Designed for a maximum weight of 60 kg. Maximum load for buoyancy: 180 kg
User comfort
Foam deck for comfort and grip.
Instructions
Download it hereTECHNICAL INFORMATIONS
Recommended user weight and maximum load
Recommended user weight:
Less than 60 kg: the ideal board for beginners.
60 to 80 kg : We recommend the larger size (size M)
More than 80 kg: We recommend a more stable board (size L)
Maximum load to stay out of the water: 180 kg.
Inflating & deflating the Stand Up Paddleboard
INFLATION:
Check the valve’s orange button is up (closed), by pressing on it.
Connect the pump.
Inflate to 15 psi.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
DEFLATION:
Firmly push the valve’s orange button to let the air out.
Do not put your face near and stay back.
Roll, starting from the opposite side to the valve to remove all the air.
Exposure and storage advice
Never leave your board out of the water in direct sunlight.
If you have to leave your board in the sun, we recommend keeping it away from any sources of heat (walls, floors, car roofs, etc.) and reducing the pressure to 10 psi in order to prevent overpressure and irreversible damage (explosion, delamination, leaks, etc.).
Fin and fin base
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8403374
Remember to remove the fin once you get off the water.
If possible, rinse the fin base before and after use.
Start folding up from the fin base, following the dotted lines to avoid damaging the base.
Maintenance tool
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
Technical dimensions
Inflated board:
Length: 8' (244 cm)
Width: 30" (76 cm)
Thickness: 5" (12.5 cm)
Volume: 187 litres
Weight: 6.5 kg (+/- 10%)
BAG CONTAINING THE FOLDED SUP:
Height: 90 cm
Width: 30 cm
Thickness: 20 cm
These dimensions leave space for the pump and paddle.
Repair
We have a stand-up paddleboard repair kit, reference 8512384.
We recommend that you contact the workshop of your local store for all repairs.
Leash
NEW light LEASH for more comfort.
Always wear your leash to stay attached to your board if you fall. It is attached to the ankle and cannot be used in surf or on rivers.
Remove it and rinse after each use.
Store it in the pouch in the bag to protect your PAD when folding.
Bag contents
Board
Fin
Leash light
Paper user guide
Repair patch (without the adhesive)
Valve tightening tool (use only with the deflated SUP board)
Recommendations for use
We recommend:
Always wear a buoyancy aid or a PFD belt.
Do not go beyond 300 metres from shelter.
Don’t use the leash on the river.
Notify someone of your trip and your whereabouts.
Research to find out if there are any local navigation rules that apply to the location of your trip.
Construction
Single-layer 0.65 mm light knitted light dropstitch without a stringer for reduced weight and greater rigidity when paddling.
COMPOSITION
composition
Main part: 70.0% Polyvinyl Chloride, 30.0% Polyester; Foam: 25.0% Ethylene Vinyl Acetate, 75.0% Polyethylene; Carry bag: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store deflated and flat out of sunlight, after removing the fins. When storing inflated, release some pressure and do not leave the board in the sun or exposed to high temperatures
Restrictions on use
Not suitable for paddling further than 300 m from shelter.
TESTS AND WARRANTY
Parts guarantee
2-YEAR guarantee. Availability of spares that are essential to using the product: 10 years
Videos
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Long lastingRepairability
Product designed to be repairable on more than 80% of breakages and failures.
Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.