Women's warm waterproof snow boots - SH500 high - lace-up
Store Availability
Store availability
BENEFITS
Easy dressing
Wide opening and full lacing for easy donning and adjustment
Traction
Traction on snow thanks to the location and depth of the 4 mm studs
Grip
Grip with SNOWCONTACT technology: materials and tread pattern of the soles
Warmth
Measured comfort temperature: static -8°C in movement: -17°C
Waterproof
Breathable, waterproof membrane to keep your feet dry
TECHNICAL INFORMATIONS
Can I be sure that my boots are warm enough for my winter hikes?
We chose a warm lining that has insulation to give you effective protection from the cold.
We tested it in the laboratory and in the field with our user representatives. We checked the temperature down to which it stays comfortable when you're stationary and when you're walking, as this varies a lot: -8°C when static and -17°C when moving. We also took into account how temperature is felt differently by men and women.
How do my boots protect me from outdoor conditions?
Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.
How can I be sure my boots are 100% waterproof?
We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and ageing.
What is the difference between traction and grip?
The boots’ traction depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot.
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.
Which type of grip and traction does this boot provide?
Your boots, which are equipped with SNOWCONTACT soles, have been designed for maximum comfort in terms of grip for hiking and traction on snow. The location and height of the studs (4mm) are spaced strategically for optimal grip when hiking on snow The surface and layout of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to avoid slipping.
How does the SNOWCONTACT technology used on the boot sole help me?
SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.
Will my boots withstand regular use over the long term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our checks include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
How do I choose the right footwear for snow hiking?
To gear up in the winter, we recommend you follow the following principles :
Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool)
Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimise moisture.
Boot height: adapt the height of the sock to the height of the upper and preferably choose high models if you want more protection.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. As a result, the fabric does not soak up water & stays light, breathable & warm. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the the boot. Products (spray or liquid) for this purpose are available in our stores.
How to dry the inside of your boot.
In use, the boot can become damp (condensation and perspiration)
If the boot is very wet, we advise you to remove the insole, fill the upper with newspaper balls and change them regularly. The paper will pump out moisture and speed up drying.
Never put the boots too close to a heat source. Leave them in a warm, dry and ventilated place.
COMPOSITION
composition
Upper of: 31.4% Polyurethane, 67.2% Polyester, 1.4% Polyester; Lining and sock of: 20.0% Acrylic, 7.8% Polyurethane, 24.5% Polyester, 1.5% Polyamide, 46.2% Polyester; Outer sole of: 100.0% Synthetic Rubber
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store your products in a well-ventilated room away from light and moisture.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Body shape (in particular from 3D analysis) Movement science Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences In particular, we test the holding of seams, gluing, toxicology, resistance to UV and abrasion.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our field test engineer, our product manager, as well as a panel of testers test the products throughout their development until they are marketed.
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 27% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
-
MaterialRecycled rubber
Product made from 10% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 8%.
-
ProcessDope dyed
Product made from 4% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.