PRESSURE SOLAR CAMPING SHOWER - 10 LITRES
Our camping designers have created this 10 litre pressure-balanced solar shower so you can have a comfortable shower outside and wash your belongings.
Our motivation? We want to provide you with a solar shower solution that you do not have to hang up! The water will be pressurised even if your shower is on the ground thanks to the pumping system!
BENEFITS
Compact design
Compact and easy to fold up: 22 cm x 22 cm x 40 cm
Capacity
10 litre capacity | Adjustable button on the handle to prevent waste
Easy transport
Carrying strap | Storage bag
Easy opening / closing
Wide opening to make it easy to fill and dry quickly
Ease of use
No need to hang the shower: the water is pressurised with a pump
Weight
Lightweight: 900 g including the bag
TECHNICAL INFORMATIONS
Dimensions
Pressure shower:
Height: 52 cm | Diameter: 24 cm
Compact shower:
Height : 40 cm | Width: 22 cm | Depth: 22 cm
The shower hose is made from transparent PU.
Internal diameter: 6.5 mm | External diameter: 9.5 mm | Length: 2,6 m
TIME AND CONDITIONS FOR HEATING WATER
Heating time depends on several factors: the initial water temperature, outdoor temperature, ground type (concrete, grass, etc.), wind, sun, etc. To speed up heating, increase the surface area exposed to the sun by laying down the non-inflated shower. It’s also possible to add hot water directly but be careful as the temperature shouldn’t go over 50°C as you risk damaging the product components and putting yourself in danger.
Recommendations for use
To encourage increased temperature, put the shower in the sun between :12:00 and 18:00. We advise against putting it behind a car windscreen; our tests show that the water could go beyond 70°C. Be aware that the temperature drops as soon as the sun fades. When you put the pressure on, a ringing noise from the valve will signal maximum pressure: pump again when the pressure drops in use.
DESIGN TEAM TESTS - STANDING SHOWER
Here are our temperature readings after a heating test on the standing shower exposed to the sun. The test took place one mid-June afternoon in the south of France.
The shower was standing, pressurised and filled with water to its maximum level (10 L).
Outside temperature of 25°C, barely any wind, 750 W/M² solar power. Initial water temperature:22°C.
In 3 hours, the water went from 22°C to 30°C
In 5 hours, the water went from 22°C to 35°C
In 6 hours 48 minutes, the water went from 22°C to 38°C.
DESIGN TEAM TESTS - SHOWER LAY FLAT
You can improve heating time by increasing the area exposed to the sun: lie the shower horizontally on a table or on the ground. Performance will be improved under the same test conditions in standing position.
WATER TEMPERATURE GAUGE
We have added a water temperature gauge. This start when the water is at 30°C and goes up to 40°C. In all cases, it is recommended to let the water run a little before taking your shower to ensure that the water is not too hot.
WATER VISIBILITY
We have added a window so you can see the current water level.
Don't throw away, repair !
This shower is sold with a repair kit for the pump (seals).
You can find the shower head with the hose and pump repair kit on our website in after-sales service.
To watch our tutorial videos, go to our after-sales service website.
For the shower head with hose, copy the code in brackets (8802111) and paste it into our search function.
For the repair kit, copy the code (960271) and paste it into our search function.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Main part: 100.0% Polypropylene; Main fabric - Coating: 100.0% Polyurethane; Carry bag - Main fabric: 100.0% Polyester; Webbing: 100.0% Polyester; Complementary parts: 100.0% Acrylonitrile Butadiene Styrene; Carry bag - Coating: 100.0% Polyurethane
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We recommend you choose a clean, dry area. It is best to wash and dry your shower before storing it away.
Restrictions on use
Caution: Do not drink the water stored in the shower.
TESTS AND WARRANTY
Test product
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing high-quality products for camping trips and giving you access to all our expertise.
Warranty
2 Years
Agree by
Based on user feedback we have improved this solar shower. We have revised the shape of the pump handle, added 2 more litres, a window to see the water level and a soft hose with connector for the shower. The latter is attached to the base of the shower to prevent water waste. The new feet prevent damage to the bottom of the shower. Finally, the carrying strap lets you carry the shower over your shoulder or by hand.