Men's Sailing Jacket - Waterproof Jacket Sailing 500 grey black

WATERPROOFING

- Membraned two-layer fabric

- A heavy rain corresponds to a flow of 100 l/m2/h - (= rainfall of 100 mm/h)

- The rainfall simulator reproduces these conditions for 3 hours.

- Component is resistant to water pressure of 15 000 mm

- Water-repellent components (water runs off the fabric).

- 100% taped seams.

- Central opening features a flap with a drainage channel for optimal waterproofing

BREATHABILITY

RET <12: very breathable.



To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.

Sleeves

The jacket has two cuffs on each arm to limit water ingress.

They can be adjusted with a rip-tab, letting you easily put on a pair of mittens or gloves over the first cuff, then tighten the sleeve cuff above

Hood adjustments

It has two adjustable features:

- an adjustment around the head to customise the hood in relation to the depth of the user’s face

- an adjustment around the neck to press the hood against the face and limit the entry of air and water. The visor also keeps your face well protected from water trickling down.

The hood can be stored in the collar.

The details providing great comfort

The collar is lined with fleece for increased comfort.

The pockets are also lined with fleece to warm them up when sailing.

RESISTANCE TO WEAR

Injected plastic central zip resistant to salt oxidation.

Outer fabric having good resistance to wear

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY step 1: before washing

Close all zips and flaps and remove any parts of the clothing that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.

Then turn the clothing inside out to wash it.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY step 2: washing

You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach.



Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.



Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY Step 3: Drying

Drying is a crucial phase in reactivating the water repellent treatment.

We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.



Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a spray sold in our stores.