100 COMPACT 8FT (S) INFLATABLE STAND-UP PADDLEBOARD - YELLOW/WHITE (up to 60kg)

Recommended user weight and maximum load

Recommended user weight:



Less than 60 kg: Ideal board for easily getting into stand-up paddleboarding on calm bodies of water.

60 to 80 kg : We recommend the larger size (M/9') for more stability.

Over 80 kg: this model is not designed for you; we recommend the larger size (L)



Maximum load to stay up out of the water = 180 kg.

Inflating & deflating the Stand Up Paddleboard

INFLATING:

The SUP is equipped with a new-generation valve to guarantee even more security.

To inflate your SUP, open the cap and connect the pump (“IN” mode).

Inflate to 15 psi for best results.

Disconnect the pump and close the outer cap.



DEFLATING:

Turn the cap a quarter clockwise (“OUT” mode).

Roll, starting from the opposite side to the valve to remove all the air for tight folding.

Close the cap.

To ensure optimal space efficiency, follow our folding method

Fully deflate the board

Roll up the product a first time to expel the air through the open valve.

Unroll the board and lay out flat. Fold it lengthways with the fin bases positioned outwards.

Roll up from front to back.

Use the compression strap to keep it rolled up and help you fit it into the bag.

For more details, check out our videos online available on the product page.

Fins and fin bases

2 118 mm fins for paddling in shallow water.



Available through customer service and online in the event of breakage or loss (8502106).

Remember to remove the fins once you get out of the water.

For your safety, protect your hand if you need to apply force to the rear of the fin to remove it in the event of blockage with sand.

If possible, rinse the bases of the fins before and after using the stand-up paddle board for easier fin installation and removal.

Technical dimensions

INFLATABLE BOARD:

Length: 8' (244 cm)

Width: 30" (76 cm)

Thickness: 5" (12.5 cm)

Volume: 187 litres

Weight: 6 kg (±10%)



When folded:

Height: 48 cm

Width: 31 cm

Thickness: 19 cm

Our boards can be repaired!

We have a stand-up paddleboard repair kit, reference 8512384.

We recommend that you contact the workshop of your local store for all repairs.

We can repair bases of the fins, handles, valves and significant leaks

Leash

Very lightweight leash that you won't even know is there during use and is easy to store.

Always wear your leash to stay attached to your board if you fall.

To avoid damaging the leash and leaving marks on your folded board, remove and rinse after each use.

This leash attaches to the ankle.



PLEASE NOTE: don’t use the leash on the river.

Bag contents

Storage backpack

Board

Fins X2

Leash

Instructions

Repair patch

Recommendations for use

We recommend:

Using a buoyancy aid jacket (reference 8501295) or a buoyancy aid belt (reference 8600104)

Not suitable for paddling further than 300 m from shelter.

Don’t use the leash on the river.

Notify someone of your trip and your whereabouts.

Research to find out if there are any local navigation rules that apply to the location of your trip.

Compact board storage

Store deflated, flat and out of sunlight, after first removing the fin and leash. If storing inflated, release some of the pressure and store in a flat position without any load.



Excluding transport, you don’t need its extreme compactness, preferably storing it inflated or rolled lengthways.