Women's waterproof 3in1 travel trekking jacket - Travel 100 0° - Burgundy
Store Availability
Store availability
BENEFITS
Anatomic design
Fitted at the waist with press studs, and a Velcro tightening at the cuffs
Modularity
3-in-1: It adapts to every season thanks to the removable fleece.
Robustness
Polyamide fabric is extremely resistant to abrasion and chaffing from the bag
Warmth
Comfortable down to 0°C. Removable fleece lining
Weight
This jacket weighs approximately 1.12 kg in size M
Waterproof
5000 mm H²0 coating (Schmerbers). 2-hour shower. Fully taped seams.
Pockets
2 hand pockets with zip and 1 chest pocket on the jacket and on the fleece
TECHNICAL INFORMATIONS
3-in-1 concept for adapting to every situation
With its “3-in-1” system, the jacket is ideal for cold conditions (down to 0°C) as well as hot weather trips, as you can leave the inner layer at home, taking only the rain coat.
You can also wear the inner fleece on its own as a mid-layer over a T-shirt.
With just one jacket, you therefore get 3 options!
COMPONENT WATERPROOFING OF THIS JACKET
The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerber or mm H²0 (pressure exerted by a column of water). The higher this number, the more waterproof the fabric.
How is the thermal insulation of my jacket tested?
The jacket has undergone a thermal resistance test that measures the quantity of warmth lost between the body and outside environment. The lower this temperature, the more the product preserves body heat and therefore protects it from the cold outside. We placed the jacket on thermal mannequins that reproduce the heat emitted by the body and sweating. They are placed in temperature controlled rooms that go down to -40°C.
At which temperature will I be protected?
The 3-in-1 SH100 jacket has been certified for temperatures down to 0°C. This means that it provides thermal comfort down to that temperature, if you wear the fleece with the waterproof jacket.
How is the waterproofing of a jacket measured?
The test is carried out in 3 stages:
- First, we check the quality of the waterproofing tape on the entire jacket.
- Then, the jacket is put under an artificial shower with a flow rate of 100 L/h for 3 hours.
- Under the jacket, the mannequin is wearing an absorbent fabric that darkens to indicate any moisture, in order to check the waterproofing of the product.
WATERPROOFNESS OF THIS JACKET
The waterproofness of a jacket isn’t limited to just its components: the assembly technique of the different parts is also an evaluation criterion.
Whether heat-sealed or sewn then waterproofed, the overall waterproofness of your jacket is measured using a shower test developed by Decathlon, which simulates rain of different intensities.
As such, the 3-in-1 SH100 waterproof jacket protects you from a downpour, i.e. 12 cm of rain in 2 hours.
Which size should I choose?
This jacket was designed to be worn over a second layer garment (fleece, sweater). Select your usual size for the best fit. The jacket has a longline cut that stops at the middle of the buttocks. You can tighten the waist thanks to the snap fasteners. Adjust the hood using the drawcord around the face. Its depth is adjusted by a rip tab at the back of the head.
COMPOSITION
composition
Main fabric: 100.0% Polyamide; Hood fabric: 100.0% Polyamide; Lining: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Always dry this waterproof protective garment thoroughly before storing.
TESTS AND WARRANTY
Test product
This jacket was first tested in the laboratory, on a whole set of factors (warmth, waterproofing, durability). It was then tested by a small panel of users, at the heart of our global development centre, to assess the comfort, fit and practical features. Finally, it was inspected in the field by volunteer customers as part of a test mission, as are several of Decathlon’s products
Warranty
2 Years