3/2 junior wetsuit front zip 900 - black khaki
Store Availability
Store availability
BENEFITS
Easy dressing
LARGE opening at the front with full-length flap and front zip construction
Freedom of movement
Ultra-stretch neoprene with front chest zip
Reduced chafing
Neoprene ultra-stretch on the neck and underarm inserts for comfort.
TECHNICAL INFORMATIONS
Choose the right size
To make the most of the features of your wetsuit, it is necessary to choose the correct size. A surfing wetsuit should be a very tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet. If you choose a diving suit that is too big, folds will appear, you will experience irritation and thermal comfort will be reduced (letting in water).
Try it on before you buy it!
Materials
The 900 diving suits are made from 100% ultra-stretch neoprene, to guarantee improved comfort during use and a high level of freedom of movement.
The neoprene is lined with synthetic fabric for increased resistance to wear.
Neoprene thickness: 3 mm and 2 mm
We test and guarantee the quality of our neoprene materials.
Neck
The neck finish has been developed to limit irritations. According to the sensitivity of the wearer, a UV top can be worn under the wetsuit to reduce the risk of irritation. The application of grease (e.g. Vaseline) in friction areas (neck, underarms, knees) is also recommended if wearing the diving suit for long periods.
Maximum freedom of movement
The 900 Junior wetsuit range offers a style and material specifically chosen to facilitate paddling and fully ease movement especially during “Take Off”.
The entire diving suit is made from ultra-stretch neoprene.
All the seams are stretch seams.
The front zip totally frees up the back during use.
Fastening
The fastening system with a front zip ensures freedom of movement while providing a better watertight seal than a traditional back zip. The zip pull is made from stainless steel so as resist the corrosive effects of salt water.
Watertight assembly
The seams are stitched and glued for a watertight seal and robustness.
The seams are "blind-stitched", meaning the thread does not entirely pass through the neoprene, preventing water getting through.
To further enhance the watertightness and strength of the joints on our 900 ranges, they are fully braided on the inside.
The absence of threads on the inside also avoids irritation and chafing.
Patches for comfort and reinforcement are strategically placed on the inside in sensitive areas.
Water stoppers
The ankles and wrists feature silicone stoppers to help stop water getting in. They also help keep the suit firmly in place when using gloves and boots.
Key pocket
There is a key pocket in the front panel under the zip.
Multi-water sports wetsuits
Our wetsuits are designed to meet the needs of the most demanding surfers.
Our design choices also make them compatible with other water sports.
COMPOSITION
composition
Foam: 100.0% Rubber; Main fabric: 14.0% Elastane, 86.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
In a dry, well-ventilated place. Avoid heat sources. To extend the life of your wetsuit, do not leave it out to dry in direct sunlight. Machine washing is not recommended.
Restrictions on use
17 to 22°C water.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality and robustness.
Warranty
2 Years
Parts guarantee
2 years
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Long lastingRepairability
Product designed to be repairable on more than 80% of breakages and failures.
Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 11% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.