Men’s synthetic mountain trekking padded jacket - MT100 hooded -5°C
Store Availability
Store availability
BENEFITS
Compact design
Easily folds away into its left-hand pocket using a zip with double puller
Water repellent
Surface-treated outer fabric to prevent water from getting in
Easy maintenance
Synthetic fabric and filling that can be machine washed at 30°C
Ecodesign
Made from 70% recycled polyester guaranteeing effective product use
Robustness
100% polyamide outer fabric, 39 g/sqm. 20 denier
Warmth
Comfortable between 5°C and -5°C. Wadding filling (125 g/sqm). Jacket hem drawcord
Weight
This padded jacket weighs approximately 370 g in size L
TECHNICAL INFORMATIONS
Check out the eco-design of this padded jacket!
The filling of this padded jacket is made from 100% recycled polyester fibres.
For the lining, we use a “bi-ton” dyeing process where only one thread in every two is dyed. This dyed thread is also the result of dope dyeing which incorporates the colour pigments from the initial thread manufacture to avoid the use of dyeing baths and reduce our water consumption.
This process can reduce CO2 emissions by 40% compared to traditional dyeing methods.
Additional sustainable development information
On MT100 black, MT100 khaki and MT100 blue models, the outer fabric uses a clean dyeing process called "Dope Dyed" which consists of integrating colour pigments in the form of the thread (and not submerged in a dye bathing or in the water). This reduces consumption and the discharge of waste water from colouring our fabrics.
How warm is this padded jacket?
This padded jacket, worn as a 3rd layer, has been certified for an active comfort temperature of -5°C during a standardised test in a thermal chamber. The model is wearing a synthetic long-sleeved T-shirt and a light fleece underneath. It works with a simulated 5 km/h wind.
We have also tested this model in static mode. The comfort temperature is +5°C in this case.
Want to know more about the wadding?
We use 100% polyester wadding (70% recycled) weighing 125 g/sqm in the body and 150 g/sqm in the sleeves and hood.
The wadding is made from silicone-coated spiral fibres that make it highly compressible and highly durable.
Despite its low thickness, it has high insulation properties thanks to the air trapped inside, and remains lightweight.
It retains its warmth even when wet.
Durable materials
This polyamide fabric uses 20 denier thread (thread thickness unit of measurement) and resists 20,000 cycles of abrasion. Durability is calculated using the Martindale test, Standard 12 947-2. This test rubs the jacket's material against another material with the objective of finding the product’s usage limits.
Outer: 100% polyamide fabric 39 g/sqm, 20 denier
Lining: 100% polyamide fabric 35 g/sqm, a mix of 15 to 20 denier threads
Water repellent property of component (not to be confused with waterproofing)
The water repellent property of a fabric is its ability to make water run off its surface without absorbing it.
This prevents the fabric from swelling, and keeps it lightweight and warm. The fabric is made water-repellent by treating its outer surface, this property may deteriorate with use.
We recommend that you restore it after each wash.
PFC-free water-repellent treatment
With the MT100 padded jacket, the water-repellent treatment does not use PFC (perfluorocarbons) or is considered PFC-free.
PFCs are used to make fabric water-repellent, however they are toxic to the environment and people. By replacing the PFCs with other technologies that we are developing to enable the same level of performance, we are helping to reduce this environmental impact.
How to restore water-repellent properties?
Once you have cleaned your padded jacket, we recommend you use a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. Just renew the fabric's water repellent-properties and optimise your garment's performance throughout its lifetime. You will find it in store and on our website by entering the reference 8554908
A snag? This is how to repair your down jacket
A tear on a padded jacket can happen when trekking! The good news is that it can be repaired so the tear doesn’t get any bigger or to stop the synthetic fibres from escaping.
Don't you feel at ease carrying out this repair yourself? Don't worry! Our in-store Decathlon workshops offer a repair service to mend your padded jacket using a heat-bonded patch.
Functions
Inside flap under the zip that protects from the wind.
Elasticated cuffs. Elasticated cuffs, Soft fabric flap at the top of the collar to protect the chin.
Tightening with an elastic cord and toggle at the hem.
Hood with elasticated bias binding.
A score for comparing products' environmental impact
The product's environmental impact is calculated over its entire life cycle using various indicators. A score from A to E is given to help you easily identify the most eco-friendly products by comparing products of the same type (T-shirts, trousers, backpacks, etc.) Decathlon is a voluntary supporter of this environmentally-friendly labelling approach.
COMPOSITION
composition
Main fabric: 100.0% Polyamide; Main lining: 100.0% Polyamide; Padding: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
To keep the wadding inflated, we recommend you store your padded jacket on a hanger and not folded up in its pocket!
TESTS AND WARRANTY
Test product
In November 2017, 6 trekkers (4 men and 2 women) and part of the Forclaz design team tested this jacket for 4 days in the southern French Alps (Lus La Croix Haute). We were then able to make the final modifications and validate it for use for mountain trekking.
Warranty
2 Years
Videos
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope Dyed
Colour made by dyeing polyester chips, using less water than traditional methods
Dyeing textiles requires lots of water, whilst also generating water waste from the dyeing vats. To reduce the environmental impact this has, we have chosen solution dyeing, which integrates colour pigments when manufacturing the thread. This uses less water and therefore also leads to less water wastage.