Climbing and mountaineering half rope 8.6 mm x 50 m - RAPPEL 8.6 orange
Store Availability
Store availability
BENEFITS
Stretch
Absorbs fall force well thanks to low impact force of 6.6 kN.
Lightweight
48 g/m: An excellent compromise between resistance and weight.
Versatility
Complies with 2 standards: half and twin rope.
Ergonomic grip
Reassuring diameter for abseiling. Compatible with all belay devices.
Durability
Treatment: sheath with dirt protection
TECHNICAL INFORMATIONS
Long-life treatment:
Rope with special treatment to stop water and dirt from getting in.
Greater resistance to wear
PLASMA TREATMENT:
Special treatment helps to improve rope's smoothness.
Ultrasound seal
Thanks to this new ultrasound fusion process, deterioration of rope ends is no longer an issue.
Middle marking:
To improve your safety, this rope features a black mark which indicates the middle of the rope.
Weight:
48 g/m
PLEASE NOTE: Weight measurements made according to the EN 892 standard.
For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions.
This gives you the real weight of the rope, which is often superior to the weight given by the standard.
The weight measurement according to the standard is used to compare two ropes to each other.
TECHNICAL FEATURES:
NUMBER OF FALLS: 8/22
IMPACT FORCE: 6.6/10.1 KN
DYNAMIC ELONGATION: 26.2% / 23.8%
STATIC ELONGATION: 8.8% / 8.4%
SLIDING OF THE SHEATH: 0
NUMBER OF SPINDLES: 40
WASHING THE ROPE:
It's important to properly care for your rope to reduce wear.
As dirt wears ropes down, we recommend:
1- using a rope cover;
2- If the rope is dirty, wash it with clean, lukewarm water.
Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseilles/household soap) and then rinse thoroughly with clean water.
3- Air dry the rope out of the sun and away from all sources of heat.
STORING THE ROPE:
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
INSPECTING THE ROPE:
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!
Stds/Certif.
EN 892:+A1: 2016
COMPOSITION
composition
Main fabric: 100.0% Polyamide
Tips for storage and maintenance
Storage tips
Use a rope bag, to reduce rope wear and coiling.<br /> Do not store in the boot of the car in high temperature.<br /> Avoid all contact with chemical products.
TESTS AND WARRANTY
Test product
Designed by our teams in the Chamonix valley, at the foot of the Mont Blanc, all our ropes are lab tested, certified to guarantee their mechanical features. Our technical partners test them in the field to validate product claims.
Warranty
2 Years
Agree by
Team SIMOND mountaineers, climbers, and mountain guides.