Men's waterproof leather hiking boots - MT900 - Brown
Store Availability
These waterproof boots let you progress with good support in complete safety on all relatively difficult trails and uneven slopes
Tackle uneven slopes with these high-top waterproof leather boots. Designed for long-distance walking, they'll keep you comfortable and protected on the most challenging terrain.
BENEFITS
Foot motion
Rigid sole to improve weight transfer precision in difficult areas.
Robustness
100% "nubuck" leather upper and 100% rubber stone-guard around the foot
Weight
727 g per boot in size 42 (UK size 8).
Grip
Vibram® rubber sole with excellent grip on dry and muddy terrain
Cushioning
Durable, high-performance soft PAD and EVA cushioned midsole
Waterproof
Waterproof membrane tested on a 20 km walk in water up to the mid-upper
Foot support
High-top with 2 high hooks and 1 blocker hook
TECHNICAL INFORMATIONS
MADE IN EUROPE MANUFACTURING : 100% of our Forclaz shoes are made in Europe.
TREK boots are manufactured in the European Union, in Romania, in a factory that specialises in making trekking boots.
This plant uses only water-based glues with no chemical solvents.
Most materials are of European origin.
For greater transparency, here is our partner’s link
https://www.rekord.ro/ro/productie
Tip: copy and paste the links listed on this page ;)
What type of route is this boot made for?
The type of use these trekking boots are designed for is treks at high altitude or in isolated and craggy areas, routes on or sometimes off footpaths, often with steep gradients and sheer drops.
Sections over rocks, firm snow, slopes over 1,000 metres, over 5 hours of walking.
VIBRAM®. Grip and traction of our soles
VIBRAM® branded sole with excellent grip on all terrain, dry or wet, earth or rock.
The studs also provide better grip, suitable on muddy, damp terrain
"narrow sole" for precision on difficult terrain. They don’t bend easily, to make sure they’re stiff enough when the terrain gets rough. Sole block designed for technical and difficult long-distance hiking
HOW WATERPROOF ARE THESE BOOTS?
This boot has been validated by a waterproofing test at 50,000 repeatable flexes, i.e. 20 km - 8 hours of walking in water up to the mid-upper, which today guarantees an excellent level of waterproofing for your boots.
--> Our assessment indicates a LEVEL OF 4/5
The details of tests carried out to assess the waterproofing of our boots is below, in the features section.
Can crampons be used with these trekking boots?
This model of trekking boot allows for the occasional use of STRAP-ON CRAMPONS ONLY. It is sufficiently rigid for the occasional use of strap-on crampons while guaranteeing extremely good comfort when walking.
STRAP-ON CRAMPONS ONLY:
https://www.decathlon.co.uk/p/12-point-mountaineering-crampons-caiman-straps/_/R-p-9186?mc=8320460&c=BLUE
Why choose a leather model? Benefits and disadvantages.
Advantages:
- supple leather.
- durable and waterproof, the leather prevents water running across the boot by repelling and absorbing it.
- breathable leather (natural pores of leather skin), but less so than a synthetic boot in strong heat. To reduce this problem, nubuck leather is used for greater breathability, but is also more sensitive to rain.
Drawbacks:
- it needs to be nourished, hydrated and treated to remain waterproof
How to maintain the waterproofing of your boots? It’s a question of the right accessory and a bit of elbow grease!
A waterproof grease is recommended to nourish leather to stop it drying out (cracking), to MAKE IT WATERPROOF and protect against stains.
1/ TREKKING SHOE MAINTENANCE BRUSH https://www.decathlon.co.uk/p/trekking-shoe-maintenance-brush/_/R-p-307665?mc=8551990
2 / RE-WATERPROOFING GREASE FOR LEATHER SHOES https://www.decathlon.co.uk/p/grease-for-re-waterproofing-leather-boots/_/R-p-9513?mc=8229704
HOW TO MAINTAIN YOUR LEATHER BOOTS ? steps to follow
1/ Remove the laces to avoid smearing them with grease.
2/ Dry brush them to remove dust and any particles stuck on the leather. This is essential so any dirt doesn’t get stuck under a new layer of grease.
3/ Grease the leather with a brush, rub it deep into all the seams and gaps.
4/ Wipe off the excess grease with a soft cloth.
5/ Rub gently to make them shine.
6/ Replace the laces!
Waterproof boot or gaiter? it’s not necessarily one or the other! it provides additional protection
The waterproofing of boots is often compromised because water gets in at the collar of the boot. --> To keep your feet dry for longer, it is advisable to use a waterproof gaiter or mini-gaiter that will prevent water as well as pebbles and sand from getting inside through the top of the boot.
Model perfectly suited to this TREKKING GAITER MT500 BLACK €15
https://www.decathlon.co.uk/p/trek-500-trekking-gaiters-black/_/R-p-124466?mc=8347880&c=BLACK
Which size should I select?
GOOD TO KNOW
- For hiking, do not hesitate to choose one size above your usual size to ensure optimal comfort when going downhill and prevent your toes from hitting the front of the shoe.
Tip: keep your toenails short and, before descending, check that your lacing prevents your foot from sliding forwards inside the boot. It's often advisable to lace boots up tighter to begin a long descent.
5 levels of waterproofing
During the waterproofness test, we test 5 levels of waterproofness:
- 2,000 flexes (approximately 4 km, 30 minutes of walking)
- 10,000 flexes (approximately 10 km, 3 hours of walking)
- 30,000 flexes (approximately 15 km, 6 hours of walking)
- 50,000 flexes (approximately 20 km, 8 hours of walking)
- 100,000 flexes (approximately >20 km, 24 hours of walking)
Waterproofing test
Our boots are laboratory tested by 2 consecutive tests.
Test 1: We test the effectiveness of the membrane alone immersed in water under air pressure. We simply check for any bubbles on the surface like a pierced air chamber.
Test 2: Thanks to a mechanical arm that simulates walking, the entire boots are half immersed in water and they complete thousands of flexes to check that the inside of the boot remains dry and it is therefore waterproof.
BUYING TIPS how to try on your boots?
How to choose your boots:
1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces correctly.
3. Check the following two areas of comfort: the base of the heel and the front part of the foot going down. 4. Stand up to walk with the boots on.
5. Try on several sizes and several models.
6. Gradually start using you shoes during your first few hiking trips to break them in.
CO-DESIGN closest to the anatomy of the foot in partnership with a chiropodist
These boots were co-designed with passionate trekkers, each bringing their own special skills. For example, one of our co-designers is a chiropodist who helps us to meet the physiological needs of people's feet and to make sure they are comfortable and safe during treks. Also to check that the inside of the boot remains dry and it is therefore waterproof.
Sports knowledge
Decathlon SportsLab contributes to the innovation and design of Decathlon products by increasing knowledge of the human body in its environment.
Our researchers explore the working and needs of sportspeople's bodies as they practise their sport.
Thanks to their knowledge of sports sciences, thermal comfort, morphology and perception, our experts contribute to the safety and well-being of our sports people.
SPORTSLAB: https://www.youtube.com/watch?v=XpfMJNQSthY
Lab tests
Laboratory tests were conducted to test the following elements: - tearing of the eyelets and straps
- bonding of the sole
- toxicology
- UV-resistance
- abrasion of the sole and components of the upper
- accelerated ageing
COMPOSITION
composition
Upper of: 20.0% Polyester, 20.0% Butadiene Rubber, 60.0% Leather - Bovine (Cattle); Outer sole of: 40.0% Ethylene Vinyl Acetate, 60.0% Butadiene Rubber; Lining and sock of: 40.0% Polyester, 60.0% Leather - Bovine (Cattle)
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
Storage tips
Store in a dark, dry and well-ventilated place.
Restrictions on use
Not suitable for mountaineering.
TESTS AND WARRANTY
Test product
All our boots are tested for user comfort and field tested by users who represent the target market in conditions identical to those found in typical use. In particular, our Test Missions link the product manager up with people who are not affiliated to Forclaz and Decathlon to test, develop and approve our products.
Warranty
2 Years
Agree by
user reviews from our trekking customers contribute to the development and continuous improvement of our hiking boots.