Inflating & deflating the Stand Up Paddleboard
INFLATION
To inflate your SUP, check that the valve is in the raised position (closed), so that air does not escape.
Connect the pump.
Inflate to 17 psi: pressure at which the board is most stable and glides best
Unplug the pump and close the outer cap.
DEFLATION
To deflate your SUP, push the valve in firmly, the air will escape.
Roll, starting from the opposite side to the valve to remove all the air for tight folding.
Fin and fin base
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8403374
Remember to remove the fin once you get off the water.
If possible, rinse the fin base before and after use.
Start folding up from the fin base, following the dotted lines to avoid damaging the base
Recommended user weight
Maximum load
For optimal use of the product, the maximum recommended weight is 140 kg.
The maximum load of the stand-up paddleboard is 320 kg.
Maintenance tool
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
Technical dimensions
INFLATED SUP:
Length: 13' (396 cm)
Width: 31" (79 cm)
Thickness: 6" (15 cm)
Volume: 335 litres
Weight: 12 kg (+/- 10%)
BAG CONTAINING THE FOLDED SUP:
Height: 90 cm
Width: 46 cm
Thickness: 24 cm
Repair
We have a stand-up paddleboard repair kit, reference 8512384.
We recommend that you contact the workshop of your local store for all repairs.
80% of your board can be repaired.
Bag contents
Board
Fin
Leash
User guide
Repair patch
Valve tightening tool (use only with the SUP deflated)
Recommendations for use
We recommend wearing a buoyancy jacket (reference 8387600) or a buoyancy belt ( reference 8600104)
Do not leave your inflated board in heat or sun when you're not on the water.