Inflatable high-pressure touring kayak I Strenfit X500 dropstitch 2-person
Store Availability
Store availability
BENEFITS
Anatomic design
Adjust the foot rests to your size in the cockpit area whenever you want.
Easy assembly / dismantling
Inflate in 6 minutes using a double-action hand pump to 15 PSI (1.03 bar)
Versatility
The coaming lets you use your spray deck so that you can paddle in all seasons.
Glide performance
Great sensations! The V-shaped hull limits friction on the water.
Robustness
Reinforcements in the areas exposed to friction, leaving you free to paddle.
Volume
3 cleverly placed cargo areas to transport up to 210 kg, you included.
Sitting comfort
Two very dense foam seats suitable for your full day touring.
Instructions
Download it hereTECHNICAL INFORMATIONS
Dimensions How heavy is it?
When the kayak is inflated:
> length: 528 cm
> width: 70 cm
When stored in its bag:
height: 100 cm
> width: 45 cm
> thickness: 38 cm
> full weight: 30 kg (26.5 kayak Dimensions of the bag + 3.5)
Hatch storage: 60 cm
An innovation, and a patent pending!
A high-performance 2-seater inflatable kayak that you can take everywhere with your trolley bag, in short: freedom! Based on the X500 1-seater kayak, we decided to develop a 2-seater kayak. 5 prototypes were necessary. The main challenge was: offering rigidity and performance with a 2-seater inflatable kayak. Therefore, its was the unique cut and assembly of the materials used that we decided to patent.
Why a rigid inflatable kayak?
We listened to kayakers: “I would like to share experiences with one other person in a kayak”, “I am looking for a 2-person inflatable kayak with the same performance as a rigid kayak”.
Why the name "Kayak X500 DropStitch"?
Dropstitch is a mesh made of polyester yarns; between 2 layers of PVC. When the floor is inflated under high pressure, the threads are stretched and the construction becomes very strong, thus avoiding any deformation.
How to inflate and mount the kayak?
1. Inflate the main chamber (floor), then the intermediate chambers (walls), followed by the small chambers (arches). All the volumes are inflated to 15 PSI max (1.03 bar).
2. You can insert the foot-rests on the flexible guides, push them inside the kayak, and adjust to your leg length with the buckle.
3. Position the seats by fitting them onto the shims provided.
4. Position the backrests under the coaming.
We recommend the HP Itiwit twin-action hand pump (8387655), not supplied.
How to disassemble and deflate the kayak?
You'll see it's quite simple!
1. Make sure the folding surface is clean.
2. Remove the seats.
3. Remove the foot rests
4. Deflate the kayak by removing the cap and pressing the valve. (Leave the valve in the open position for air to escape)
5. Tuck in the hatch and start folding lengthways.
How to fold it up to put it in the bag?
1. We recommend placing the canvas of the bridge inside the fold.
2. Fold the keel over its entire length. This fold ensures that the width of the kayak is the same as that of the bag.
3. To fold your kayak, start with the front tip then fold at the first dashes. Repeat the operation 4 times such that the kayak folds like a snail
4. Strap up the kayak - strapping it well will make it easier to fit in the bag.
What if the kayak is pierced?
It would take something sharp to make that happen. If so, the kayak is composed of 6 independent “air chambers”. 1 or 2 of punctures? The kayak floats enough to make it back to the shore safely.
To preserve the life expectancy of your kayak, we advise you to avoid contact with oyster shells and sharp reefs.
The team offers their tips for your comfort ...
Olivier is a product manager at Itiwit. Like the whole team, he is passionate about kayaking. His advice: “Make the most of it, really take the time to sit in the middle to balance yourself, to adjust your foot rests. Once you are comfortable, off you go.
Lucas is a product engineer, his thing is to always leave with dry clothes in a small waterproof bag. You can place it in the front of the kayak for easy access.
What does the Kayak bag contain?
The kit includes:
- the trolley bag
- the kayak
- two seats
- four foot rests
- a repair kit
It does not contain spray decks. The kayak is compatible with the Itiwit spray deck code: 8801423
Directions for use.
To prolong the life span of your kayak, it's best not to suck out air using a pump during the deflation process
We recommend practising with a life jacket.
COMPOSITION
composition
Main fabric: 100.0% Feather; Inside shell - Main fabric: 100.0% Silicone; Carry bag: 100.0% Silicone; Foam part: 75.0% Down, 25.0% Foamed EVA
Tips for storage and maintenance
Storage tips
Dry, deflate, fold up. Store your kayak in its bag in a cool, dry place. Avoid sucking out air with a deflation pump
Restrictions on use
Designed for one person up to 1.90m.
TESTS AND WARRANTY
Test product
Our kayak is tested and approved by our internal and external ambassadors. Some examples? Olivier and Diego have travelled through the Dordogne with this kayak: 250 KM in 2 days. Find their stories and our videos on our site dedicated to all things kayak: itiwit website.
Warranty
2 Years
Agree by
Standard ISO 6185-1: corresponds to the international inflatable kayak standard.
Parts guarantee
Warranty: 2 years Availability of spare parts essential to the use of the product: 10 years