Women's Ski Jacket - Beige
Store Availability
Store availability
BENEFITS
Water repellent
Water-repellent outer fabric that does not get waterlogged.
Ease of use
Elasticated tightening at the cuff to prevent snow entering.
Warmth
Insulation made of extra-thick wadding.
Waterproof
CORRECT: 3000 mm-rated coating and partially-taped seams.
Pockets
4 pockets: 2 hands, 1 ski pass, 1 outer.
Breathability
Breathable fabric.
User comfort
A soft, warm collar for guaranteed protection and comfort.
TECHNICAL INFORMATIONS
ADDITIONAL DEVELOPMENT INFORMATION: POLYESTER
By plastic bottles or textiles to produce our polyester, we reduce the use of petrol-based resources while keeping the material's breathability in practice.
What type of padding is used to provide warmth?
To help keep you warm, we use wadding insulation (100g/m² on the arms and 150g/m² on the body). This synthetic polyester-based wadding traps more or less air, depending on the size of its fibres, to insulate you from the cold.
Which components are added to the padding give it warmth?
As well as its filling, your jacket's partially taped seams, collar and cuff tightening offer better protection against the cold and damp for a warmer feeling.
"Coated" jacket: what are the advantages of this coating?
The coating is a waterproofing material spread over the inner surface of a fabric. It prevents water from seeping into the garment but allows the water vapour produced by the body's physical activity to escape. So you stay dry for greater comfort while practising your sport.
How is the water resistance of a jacket measured?
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 3,000 mm is therefore resistant to the pressure exerted by a 3,000 mm column of water.
Which parts of the jacket protect me from bad weather?
The 100 jacket has been developed with a sophisticated component and assembly that prevent water from entering and reduce wind chill to help you cope with the weather conditions (rain, snow, wind, etc.) . We validated the waterproofing of this product in the field in various weather conditions for several days.
What is the water repellent feature of my jacket for?
The water-repellent property of a fabric is its capacity to allow water to run off its surface without seeping in. This jacket features water-repellent components that extend its weather resistance. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
How do I restore my jacket's water-repellent properties?
Bear in mind that the water repellent feature can be reactivated. To do this, put the jacket in the dryer on a synthetic programme for 10 to 15 minutes.
You can also use a waterproofing spray (sold in our stores): spray the product evenly over the entire garment, then leave it to dry for 10 to 12 hours).
What is a "breathable" jacket?
This garment wicks away the water vapour produced by your body when exercising. To see if a fabric is breathable, its resistance to evaporative heat (RET) is measured in a standardised ISO 11092 test. The lower the RET, the more breathable the fabric. The 100 jacket has an RET of 12. However, it is the technical solutions (zips, vents, mesh) that Wedze uses, which limit the condensation inside the garment and maximise breathability.
What is the fit of the 100 jacket?
REGULAR fit. The jacket has sides that fall straight and remain parallel rather than trying to follow the shape of your body. The interior volume means this jacket can be worn in combination with a first and second technical layer.
How to dress to stay warm on the slopes?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Padding: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under the same conditions as you would experience in real-life use (snow, cold, powder snow, etc). The design teams make sure that the programme for which the product is designed and developed corresponds perfectly to its use in the field.
Warranty
2 Years
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
MaterialRecycled polyester
Product made from 76% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.