Directions for use
1/ Stand on level and solid ground
2/ Check that the hose is attached on the INFLATE side
3/ Connect the hose to the inflatable
4/ Turn the orange ring to position 1
5/ Inflate the craft until it becomes difficult (approx. 8 PSI)
6/ Turn the orange ring to position 2
7/ Finish inflating to the recommended pressure.
Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT / black: other)
Storage instructions
Use the 2 fastening clips to attach the hose and pump together.
Do not stand on the pump or the hose.
Clean off any sand, it can damage the seals.
Technical dimensions
Height: 60 cm
Width: 27 cm
Depth: 12 cm
Hose length: 100 cm
60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone.
Pump weight: 1.2 kg
Volume of air transferred:
Mode 1: 2.1 litres
Mode 2: 1.2 litres
Sold with a set of adapters
In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with:
A "Mini Boston" adapter to inflate the kayak seats
a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents.
An adapter and end piece to inflate certain kitesurfing wings.
Repair
We design our products so that they are as repairable as possible. The following spare parts are available for this pump:
Handle + Pressure gauge: 8810939
Aluminium tube: 8810947
Hose: 8810949