Contents of the box
Instructions for use
2 tubes of glue
4 PVC repair sheets
1 spatula
1 sandpaper
Instructions
Lightly sand the damaged surface, clean with soapy water. Dry the surface with a cloth. Cut out a PVC patch with rounded corners. Using a pencil, locate the area of the board to be glued by drawing around the patch.
Apply the glue to the surface of the patch and to the marked-out area using the fine teeth of the spatula. Stick on the patch. Use the smooth side of the spatula to squeeze out any air and excess glue. Press down firmly until it hardens
Safety advice
DANGER. Flammable liquids and vapours. Causes eye irritation. May cause drowsiness or dizziness. Keep out of the reach of children. Do not expose to heat, hot surfaces, sparks, open flames or any other source of ignition. Do not smoke. Use only outdoors or in a well-ventilated area.
In case of fire: Use carbon dioxide foam, dry powder, or mist to put out the fire.
DANGER IN CASE OF EYE CONTACT
carefully rinse with water for several minutes. Remove the victim’s contact lenses if they can be easily removed. Continue to rinse. Repeated exposure may cause skin dryness or cracking. Take action to prevent static discharges. Dispose of the contents/packaging according to national laws.
STORAGE
Cut-to-size sheets:
Optimal lifespan: 5 years at room temperature (16-22°C, 30-70% humidity), away from direct light, in its packaging.
Minimum repair temperature: +10°C
Storage temperature -10°C to +40°C
Tube of dissolution liquid:
Closed storage, away from heat sources (highly flammable)
Optimal life:
- 5 years unopened and sealed
- 6 months once opened and kept closed
SERVICE
Feel free to ask for repair advice at our workshops in store.