Scuba diving console with 300 bar pressure gauge and depth gauge

Technical features

Pressure gauge with stainless one-piece chrome-plated brass housing – Explosion-proof, shockproof.

Copper-beryllium sensitive spiral element.

Hose with an outer diameter of 55 mm.

Male screw thread. 7/16'' HP.

Red zone between 50 bar and 0 bar on the pressure gauge and beyond 50m for greater clarity.

Highlighting of the safety limits.

Extra ring on the side to attach the pressure gauge and keep it within reach thanks to the safety strap.

Tips on assembly

To not overtighten the first stage. First stages are usually made of chrome-plated brass, a soft alloy. Overtightening can damage the first stage. The O-ring on the hose is used for watertightening purposes. Use a silicone grease to lubricate the seals and increase their lifespan.

Servicing the regulators

SUBEA advises you to service your regulator every two years and to make a visual inspection at least once a year. These two inspections must be made in a SUBEA certified workshop. A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.



Please visit our website.

Storage instructions

It is important to store all diving equipment well clear of sources that produce ozone (electric motors, cookers, etc.) and to protect it against UV rays. If this is not the case, the seals can deteriorate more quickly, affecting your safety or the working order of the regulator. Keep your equipment in a dry place away from heat and direct sunlight.