Inflatable Camping Tent - Air Seconds 6.3 F&B - 6 People - 3 Bedrooms

Living room

7.1 sqm living area (with a 3rd pitched bedroom) with an inner tent height of 2.10 m.

This tent includes several accessories:

- A bathtub groundsheet that can be raised at the entrances when it is raining

- A transparent window with a blind

- A mosquito net window blind

- Storage pockets in the bedrooms and in the living area.



You can use the tent with three bedrooms, or with just two and enjoy a huge living area.

Pitching and dismantling

Inflatable all-in-one structure with pre-assembled bedrooms and flysheet.

Using our Quechua 5.2 litre red pump with built-in pressure gauge, we recommend that you inflate the tubes to 7 PSI of pressure.

To view this pump, copy the reference 8243066 and paste it into the search engine of our website.

Sun protection

Our Fresh&Black technology relies on a UPF 50+ sun protection fabric.



Caution: be careful, as a large amount of UV rays can get in through a simple open door.

Ventilation

The ventilated flysheet on the living room enables air to circulate and reduces condensation inside your tent. There is an upper air vent outside the two rear bedrooms. Inside, there is a lower air vent. The last bedroom is ideally positioned for air flow. The bedrooms have mosquito nets at the top of the doors and at the base. The living area has two mosquito nets, one at the top of the door and the other on the wall.

Wind resistance

We test all our tents in a wind tunnel on a turntable. The aim is to expose each side of our tent to the same wind intensity.

Well pitched with the guy ropes properly anchored, this tent remains habitable in a force 7 wind, measured at 60 km/h.

Waterproofing

We test our tents to validate their waterproofing. The first test is done in the laboratory, 4 hours under 200 litres of water per hour per sqm, the equivalent of tropical rain of 200 mm per hour. The second test is done in the field under real-life conditions by our teams. This tent is fitted with a polyurethane-coated polyester flysheet measuring 2,000 mm. It also has seams taped using heat-sealed strips and a 190 g/sqm polyethylene groundsheet.

Size and weight

Rectangular cover | 85 x 38 x 38 cm | 128 litres | 25 kg

Warranty

As designers and practitioners who love our playground, we care about the durability of our products. That's why all our tents are designed to be repairable. Spare parts and repairs of inflatable poles are available at the workshop of your Decathlon store or on our website at the following address: http://bit.ly/sav-tentes. Should you have any issues with this tent, please refer to the After-Sales Service sheet:

http://bit.ly/tente-gonflable-6p-3ch

Poles and tent pegs

Inflatable poles - All our inflatable poles have a two-layer arch structure: a thermoplastic polyurethane (TPU) air chamber and a 600-denier polyester cover*.

Living room reinforcement - There's an aluminium bar in the living room to stiffen the structure.

Tent pegs - All our pegs are made of steel and have a diameter of 6 mm.

*600 denier indicates a weight of 600 g for 9 m length.

Sleeping width

Each bedroom in this tent is intended to accommodate a maximum of two 70 cm wide mattresses.