TRIPLE DRY ROPE STANDARD CLIMBING & MOUNTAINEERING 8.9 mm x 50 m EDGE DRY ROSE
Store Availability
Simond's top-of-the-range rope! Triple certified, lightweight, compact, and hydrophobic for intensive use in mountaineering.
Thin and lightweight, it guarantees ease of use in all your movements. UIAA DRY treatment provides excellent damp resistance for use in extreme conditions.
BENEFITS
Stretch
Excellent fall shock absorption thanks to its low impact force of 7.9 kN
Lightweight
Ultra light at 54 g/m, making approach walk and climbs lighter on the load.
Versatility
Complies with 3 dynamic rope standards: Single / Double / Twin.
Ergonomic grip
Thin for smooth belaying. Check compatibility with your belay device.
Robustness
UIAA DRY water-repellent treatment (core and sheath), snow- and ice-resistant
Instructions
Download it hereTECHNICAL INFORMATIONS
UIAA DRY treatment:
This rope has UIAA Water Repellent label.
A brief summary of test:
- A rope sample is subjected to light abrasion over its entire surface, the equivalent to a few days’ use.
- It is soaked for 15 minutes.
- The amount of absorbed water must not be greater than 5% of the sample’s weight.
The SIMOND DRY ropes easily meet UIAA requirements
The rope’s mechanical features are last longer in cold and wet conditions.
Ultrasound finish:
Deterioration of rope ends is no longer an issue thanks to this new ultrasound fusion process.
Middle marking:
To improve your safety, this rope features a black mark which indicates the middle of the rope.
WEIGHT:
54 g/m
PLEASE NOTE: Weight measurements made according to the EN 892 standard.
For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions.
This gives you the real weight of the rope, which is often superior to the weight given by the standard.
The weight measurement according to the standard is used to compare two ropes to each other.
TECHNICAL FEATURES
NUMBER OF FALLS: 5/15/35
IMPACT FORCE:7.9/6/9.5 KN
DYNAMIC ELONGATION: 32.3% / 29.7%/ 26.8%
STATIC ELONGATION: 8.2% / 8.2%/4.9%
SHEATH SLIPPAGE: 0
NUMBER OF SPINDLES: 40
WASHING YOUR ROPE
It’s important to properly care for your rope to reduce wear.
As dirt wears ropes down, we recommend:
1- using a rope cover;
2- If the rope is dirty, wash it with clean, lukewarm water.
Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water.
3- Air dry the rope out of the sun and away from all sources of heat.
STORING YOUR ROPE
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
CHECKING YOUR ROPE
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!
Stds/Certif.
EN 892:2012 +A3: 2023
COMPOSITION
composition
Main fabric: 100.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Use a rope bag, to reduce rope wear and coiling<br /> <br /> Do not store in the boot of the car in high temperatures<br /> <br /> Avoid all contact with chemical products<br /> <br /> Dry before storing (away from UV rays)
TESTS AND WARRANTY
Test product
Designed by our teams in the Chamonix valley, at the foot of the Mont Blanc, all our ropes are lab tested, certified to guarantee their mechanical features. Our technical partners test them in the field to validate product claims.
Warranty
2 Years
Agree by
Team SIMOND mountaineers, climbers and mountain guides
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 100% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.