QuickHiker 3 person tent - green

Dimensions and weight, folded dimensions

Total weight: 3.4 kg or 1.13 kg / person.

3 in 1 = parts can be separated so that you can carry the configuration you need.

Weight of flysheet alone: 1300 g.

Weight of the room by itself: 1110 g.

Weight of pole kit: 800 g.

Weight of the pegs (12 pieces): 180 g, 15 g per piece.

Weight of the cover: 90 g.

Repair kit (ferrule, patch): 20 g.

Compression cover with straps: 15 litres.

Cover dimension: 40 cm * 20 cm * 19 cm.

Space

Total height of the tent: 128 cm.

Size of the room: Length 220 cm * width 180 cm * height 119 cm at its highest.

Two 60 cm deep side awnings (storage spaces between the bedroom and flysheet) can shelter the rucksacks (50 to 70 litres approximately) of three people, mountaineering equipment as well as hiking shoes.

3 pockets in the room. 1 hook on the ceiling inside to hang a lamp and an adjustable washing line across.

Poles and pegs

Aluminium poles 7001 Ø 9.5 mm.

Aluminium pole at the top 7001; Ø 10.5 mm.

Light and durable aluminium.

Tent pegs:

Length 17 cm; Ø 6.1 mm.

Aluminium 7075 anodised for better resistance and very light weight.

Assembly/folding

3 in 1 self-standing tent, use of parts together or apart: room and flysheet

- room alone: dry and temperate environment. Light

- flysheet alone: shelter mode - tarp; protection from rain and wind. Ultra-light.

Quick to pitch and unpitch: pre-fitted and assembled flysheet.

Slide the poles in the sheaths on the flysheet.

To store the tent in the cover, fold the poles, fold the tent and roll all parts together.

Waterproofing

The Quechua tents are tested in a laboratory (pitched tent under 200 litres/sqm/hour during 4 hours, the equivalent of a tropical rain shower, as well as test missions in the field.

Polyester flysheet (PE) 75 deniers, coated polyurethane (inside), water repellent treatment (outer), 75D PE groundsheet.

Seams waterproofed with thermobonded strips.

Breathable and water repellent 66D PE room with mosquito-netted part to prevent contact with condensation.

Wind resistance

We test all of our tents in a wind tunnel on a rotating table to expose each side of the tent to the wind.

To guarantee resistance to wind, the tent must be pitched properly, tight without excess, with all guyropes set around the tent. It will remain habitable in windspeeds up to 70 km/h near the ground.

Ventilation and limitation of condensation

Room with mosquito net parts for ventilation and parts in water-repellent fabric to protect from condensation and draughts. Large ventilation on the front of the flysheet of the tent as well as ventilation at the feet.

To limit condensation inside your tent, it must be correctly pitched, the cloth tight, not excessively. The use of ventilation and good air circulation reduces the damp inside your tent.

Warranty & After-sales service

This tent is guaranteed 2 years in normal use. The spare parts and pole repairs are available from your Decathlon workshop, Decathlon shops or on our website, at the following address: http://spi-atelier.decathlon.fr/atelier/produit/1961315

If you have a problem, have your tent looked at in your nearest Decathlon shop.