ADULTS' DOWNHILL SKI HELMET WITH VISOR H350 - CORAL
Store Availability
Store availability
BENEFITS
Lightweight
510 g in size M. The lightest of our visor helmets.
Warmth
Ear pads and thick hat in a brushed material.
Waterproof
Foam seals on the visor + helmet stop water and snow from entering.
Stability
Adjustment wheel on the back half of the head.
Impact protection
Complies with EN 1077:2007 standard (class B). Lighter InMold structure.
Sun protection
UV resistant, anti-fog, all-weather single lens visor (category S3).
Ventilation
10 holes to aerate and wick away moisture, plus ventilation channels inside.
User comfort
Partially recessed ear protectors to prevent compression of the ears.
TECHNICAL INFORMATIONS
SPECIAL FEATURE OF THE VISOR HELMET
Visor helmets are extremely comfortable and practical to use. However, we recommend them for skiers who ski at moderate speed. They are less windproof than a mask, which perfectly moulds to your nose and face. If you ski very fast, air can get in and it can be unpleasant.
For the best airtightness, you must lower the visor as far as it will go. If you can’t, then this helmet is not suitable for you.
FITTING
Take plenty of time to try it on properly. You should not feel any areas of discomfort in the helmet or around the visor. If you do then try another model.
For people who wear glasses, try the helmet with the pair you will be wearing and open/close the visor to check that there are no sticking points.
Fogging on the glasses is not caused by the helmet. There are anti-fogging treatments for glasses.
WHAT SIZE?
* Measure your head’s circumference in centimetres (around the middle of the forehead and just above the ears).
* Choose the size that covers this measurement.
Example: if you have a head circumference of 56 cm, you should try a helmet in size 55-59 cm.
ADJUSTMENT WHEEL
The adjustment wheel plays a key role in keeping your helmet secure. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also gives you comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.
IN-MOLD STRUCTURE
This type of structure, known as In-Mold, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. We recommend changing your ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.
EN 1077 Standard
Standard EN 1077:2007 is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding. This standard tests the ability to absorb shocks and resistance to penetration. There are 2 categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head
.- Class B: Protects the top and back of the head but does not cover the ears.
HELMET ADJUSTMENT
During practice, the ski helmet must be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference must be adjusted using the thumb wheel.
* The chinstrap must be properly adjusted.
It's a bit like the seat belt in a car: if it’s too loose, it will not perform its function and you will be less protected.
SAFETY
Avoid putting a thick hat under your helmet as this will move the helmet away from your head and you won't be as well protected.
Opt instead for a very thin beanie or balaclava that does not affect your safety. A helmet has good insulating properties. There is often no point in adding anything else. Also, avoid adding a camera to your helmet as this can affect safety. The standard does not take into account any elements added to the helmet.
COMPATIBILITY WITH PRESCRIPTION GLASSES
The pleasure of skiing should be accessible to all, including those who wear prescription glasses. Wedze has designed this helmet with a visor, more practical to use than an "over glasses (OTG)" ski mask. Due to issues with glasses size, some models remain incompatible. Head to your Decathlon store to try helmets on with your glasses.
CARE INSTRUCTIONS
Removable comfort foam machine-washable at 30°C.
AFTER SALES SERVICE
Some spare parts for the H 350 helmet are available from the After Sales Service in our store workshop. The following are available: the original S3 visor and screw kit to fit the visor (screws and spacers).
Return terms and conditions (Specific product: personal protection equipment)
Make sure this product is right for you.
Otherwise, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging; it can be refurbished.
COMPOSITION
composition
Foam: 100.0% Polystyrene; Outer fabric: 100.0% Polycarbonate
Tips for storage and maintenance
Storage tips
Do not store in a damp place, near a source of heat or UV rays. Dry before storing, preferably in a fabric helmet bag.
Restrictions on use
Replace any helmet that has an impact.
TESTS AND WARRANTY
Test product
All Wedze products are tested under the actual conditions of use for which they were designed: in the snow, in the cold, and in all possible conditions you could come across when skiing. The design teams, product managers, engineers and pattern makers check that the programme for which the product was designed and developed perfectly matches its use in the field.
Warranty
2 Years