Women’s Warm and Waterproof Hiking Boots - SH100 high
Store Availability
Store availability
BENEFITS
Traction
Traction on snow thanks to the location and depth of the 5 mm studs
Grip
Grip with SNOWCONTACT technology: materials and tread pattern of the soles
Warmth
Comfort temperature – when stationary: -8°C when moving: -17°C
Waterproof
Breathable, waterproof membrane to keep your feet dry
Foot support
High upper with a hook that provides a good fit and a lot of support
TECHNICAL INFORMATIONS
Can you be sure that your boots are warm enough for your winter hikes?
Based on the field and laboratory tests carried out to measure the perception of cold with a panel of users, we gauge the thermal insulation of our shoes when stationary (static -8°C) and when moving (dynamic -17°C). As a result, you now have an accurate measure of the temperature at which you are protected with these shoes. The comfort temperature ratings for your shoes is shown. We take into consideration the differences in feeling between men and women.
How do your boots protect you from outdoor conditions?
Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.
Breathable boots for optimal thermal comfort
Thermal comfort is a balance between the warmth of the boots and its ability to let the foot breathe. Too much heat or not enough breathability means that damp accumulates and cold can set in. We have designed your boots with your activity in mind, be it occasional or regular, with a membrane which prevents water ingress and lets damp out.
How can I be sure that my boots are 100% waterproof?
We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half submerged in water. We also conducted field tests to measure wear and ageing. During the waterproofing test, we test 3 levels of waterproofing: 2,000 flexes (approx. 4 km walk), 4,000 flexes (approx. 8 km walk) and 8,000 flexes (approx. 16 km walk). This model of boot has been tested for up to 2,000 flexes, which is equivalent to 4 km of walking.
What is the difference between traction and grip?
The traction of the boots depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot.
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.
Which type of grip and traction does this boot provide?
Equipped with SNOWCONTACT soles, your shoes are designed for maximum grip comfort for hiking and traction on snow. The arrangement and the height of the studs (3 mm) are strategically placed for optimal grip when hiking on snow. The surface and layout of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to avoid slipping.
How does the SNOWCONTACT technology used on the boot sole help me?
SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.
Will your boots withstand regular use over the long-term?
Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.
How do I choose the right footwear for snow hiking?
To be well equipped in winter, we recommend that you follow these guidelines :
Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool)
Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimise moisture.
Boot height: adapt the height of the sock to the height of the upper and preferably choose high models if you want more protection.
How to preserve the technical qualities of my boots?
A fabric's water repellent property is its capacity to make water run off its surface without seeping in. As a result, the fabric does not soak up water & stays light, breathable & warm. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. Products (spray or liquid) for this purpose are available in our stores.
How to dry the inside of your shoe.
Shoes can become heavy while they’re being worn in the wet (condensation and perspiration)
If your boots are very wet, we advise you to remove the insole, fill the upper with balls of newspaper and change them regularly. The paper will soak up the moisture and speed up the drying process.
Never place your shoes too close to a heat source but leave them in a warm, dry and ventilated place.
COMPOSITION
composition
Outer sole of: 100.0% Synthetic Rubber; Upper of: 30.0% Polyurethane, 70.0% Polyester; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
Storage tips
Store your products in a well-ventilated room away from light and moisture.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Body shape (in particular from 3D analysis) Movement science Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences In particular, we test the holding of seams, gluing, toxicology, resistance to UV and abrasion.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our field test engineer, our product manager, as well as a panel of testers test the products throughout their development until they are marketed.
product.ecodesign.title.tag
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 7% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 18% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.