Cycling Warm Rain Jacket 900

Cut

This jacket is adapted for a cycling position. The cut covers the bottom of the back, the arms, the neck and wrists when cycling to ensure the wearer is well protected. There are vents under the arms to help air circulate. You can wear your helmet over the hood.Equipped with 2 hand pockets and an internal chest pocket with zip fastening for added safety.

Waterproofing

The material's durability, coating and sealed seams make the garment waterproof. A fabric's waterproofing is determined by measuring its resistance to the pressure exerted by a water column, measured in mm (test based on ISO 811 standard). The higher the pressure, the more waterproof the fabric.

Our component has a waterproofing resistance of 2000 mm and can resist the pressure from 2,000 mm of water (the equivalent of a rain shower lasting around 2 hours - 2.4" to 4.7" of rain in 1 to 2 hours).

LIGHTING COMPATIBILITY

This product has a place on the flap of the rear pocket to accommodate a clip-on bike light.

COMPONENT BREATHABILITY

Hydrophilic coating (RET = 12): limits condensation inside the garment. To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more the fabric lets water vapor produced by the body escape, and the more breathable it is.

For example: RET < 9 = extremely breathable fabric / 9 < RET < 12 = very breathable fabric / 12 < RET < 20 = breathable fabric / RET > 20 = slightly or not breathable fabric.