Simond 9.5 mm x 87.5 yds Climbing Rope

LONGLIFE TREATMENT

Special treatment that increases the rope's lifespan and prevents water and dirt seepage. Greater resistance to wear.

PLASMA TREATMENT

Special treatment helps to improve rope's smoothness.

MIDDLE MARKING

To improve your safety, this rope features a black mark which indicates the middle of the rope.

TECHNICAL FEATURES

NUMBER OF FALLS: 6

IMPACT FORCE: 9.3 KN

DYNAMIC ELONGATION: 30.8%

STATIC ELONGATION: 5.6%

SHEATH SLIPPAGE: 0

WEIGHT

2.1 oz/m

PLEASE NOTE: Weight measurements made according to the EN 892 standard.

For example, for a single rope, the rope must be exposed to 10 kg (22 lbs) of tension for 1 minute in very precise temperature and moisture conditions.

This gives you the real weight of the rope, which is often superior to the weight given by the standard.

The weight measurement according to the standard is used to compare 2 ropes to each other.

WASHING YOUR ROPE

It's important to properly care for your rope to reduce wear.

As dirt wears ropes down, we recommend:

1- using a rope cover;

2- If the rope is dirty, wash it with clean, lukewarm water.

Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water.

3- Air-dry the rope out of the sun and away from all sources of heat.

STORING YOUR ROPE

Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.

CHECKING YOUR ROPE

It is important to check your rope regularly. To do so, run the rope through your hands and inspect it meter by meter along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!