Wedze FR500, Freeride Ski Jacket, Men’s
Διαθεσιμότητα καταστημάτων
Διαθεσιμότητα καταστημάτων
ΟΦΕΛΗ
Προσαρμογή στη μορφολογία
3D hood adjustment that follows your movements.
Ελευθερία κινήσεων
Loose fit and stretch fabric that follow all your movements
Ευκολία αναγνώρισης
Recco® system to facilitate the search in the event of an avalanche.
Θερμότητα
150 g/m² padding (bust) 60 g (arm) protects from the cold, vents regulate.
Αδιάβροχο
10,000 mm rated membrane, fully taped seams, waterproof zipper to keep you dry.
Τσέπες
5 secure pkts: 2 hands, 1 chest, 1 inside, 1 ski pass pkt on arm, 2 mesh pockets
Διαπνέων
RET 12 membrane, 3D mesh and vents help wick moisture away.
ΤΕΧΝΙΚΕΣ ΠΛΗΡΟΦΟΡΙΕΣ
Additional features
Hood over helmet designed to offer maximum protection ensuring freedom of movement.
Adjustable to fit 3 sizes in a single movement, using a single tightening toggle located behind the head.
Tightening on the wrist and cuffs with thumb loop to prevent air and snow from getting in.
Tightening at the bottom of the jacket and snow skirt to also prevent air and snow from getting in.
3D Mesh on the back for better moisture wicking.
Water-repellency
The water-repellent property of a fabric is its ability to enable water to run off its surface without absorbing it. This prevents the fabric from becoming waterlogged and remains light, breathable, and warm. The water-repellent property is obtained by applying a treatment to the outer surface of the fabric. This treatment needs to be renewed during the lifetime of the garment (every 3 washes). All Wedze jackets have received a water-repellent treatment.
Component's waterproof properties.
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. For example, a fabric with a waterproof rating of 10000 mm is therefore resistant to the pressure exerted by a 10000 mm column of water
Breathability of a component.
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapor generated by physical activity can escape, and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric / 9 < RET < 12 = very breathable fabric / 12 < RET < 20 = breathable fabric / RET > 20 = little or no breathability.
What is a membrane or coated component?
The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more durable, and often more breathable than a coating.
How do we make a garment waterproof?
The waterproof properties of the garment are related to its fabric, seam sealing, and assembly design.
We then carry out shower tests on our garments.
Waterproofness/Shower test
This garment has been validated in a shower test under 100 L of water / sqm / hour for 3 hours. This test reproduces the conditions of a violent storm in the mountains.
How do we make a garment breathable?
In addition to the breathability of the fabrics used, we employ technical solutions (zippers, vents, mesh) improving the overall ventilation of our jackets and pants designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
Product environmental impact comparison score
The product's environmental impact is calculated over its entire lifespan, using various indicators. An overall score from A to E is given to help you easily identify the most eco-friendly products by comparing products of the same type (T-shirts, pants, backpacks etc.). Decathlon is committed to displaying the environmental information of its products. For more information: http://sustainability.decathlon.com/
What is the RECCO® system?
All our Freeride and All-Mountain jackets and pants are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO® reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
Tutorial on how to wash your waterproof garment
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM
After 3 washes, restore the water-repellent properties with a waterproof spray or wash-in product.
Tips for storage and maintenance
Μέγιστη θερμοκρασία πλύσης 30°C. - Κανονική θεραπεία.
Εξαιρείται η λεύκανση.
Στέγνωμα στο στεγνωτήριο. - Χαμηλή θερμοκρασία, μέγιστη θερμοκρασία εξάτμισης τυμπάνου 60°C.
Μην σιδερώνετε.
Μην καθαρίζετε στεγνά.
Storage tips
Dry this waterproof protective garment thoroughly before storing it.
TESTS AND WARRANTY
Test product
Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.
Warranty
2 Years