Women's Diving 3 mm Full Wetsuit with Back Zipper SCD 100

Details on thermal insulation

3 mm full 1-piece wet type with back zipper. Seams taped using a GBS (glued and blind-stitched) assembly.

Once a thin layer of water (that enters through the zipper) gets trapped between you body and the wetsuit, the water stays warm as it is not replaced. This thin layer of water keeps you warm.

Rolled, smooth-edged cuffs, ankles and neck for maximum watertightness.

GBS (glued and blind-stitched) assembly

The seams of the wetsuit are waterproof due to GBS assembly (Glued and Blind Stitched): the neoprene is glued first of all, then sewn for maximum resistance (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).

Designed for the female body shape!

Neoprene wetsuits must be skintight to be effective. That's why SUBEA has developed specific sizing for the female body.

The designs and prototypes of these products are tested "by women, for women"!

Resistance to rubbing

The wetsuit is equipped with reinforcements on the knees to increase resistance.

Why use a 3 mm wetsuit?

Even in warm waters, the body ends up cooling down (25 times faster than in the air).

Use a thin 3 mm wetsuit that will allow you to delay this drop in temperature so that you can enjoy your activity for longer. In addition, use a full wetsuit to fully protect you from UV rays and the underwater environment (coral, etc.).

Thermal performance class

This scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille, France) in order to validate its compliance with the current standard (EN 14225-1:2005).



This wetsuit is certified for use in waters warmer than 77°F.

What is a wet diving wetsuit?

This is the most common type of diving wetsuit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside.

Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7 mm.

Thanks to their suppleness and modularity, they constitute excellent diving wetsuits.

Tips on how to get into a wetsuit

Put your foot in a plastic bag, then slip your leg into your wetsuit. You entire foot comes out without snagging!

To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.

Tips on how to take care of your wetsuit

1) Soak the inside and the outside of the wetsuit in clean water after each session.

2) Clean with an antibacterial solution.

3) Rinse thoroughly in clean water.

4) Dry on a wide hanger in a dark and well ventilated place.

Caution: the sun will cause the colors of the textile parts of the wetsuit to fade and speeds up the aging process of the neoprene.

Zipper fasteners can be cleaned with a toothbrush and lubricated with silicone grease.

What is the SUBEA brand?

Tribord Diving is now called SUBEA, the Decathlon brand dedicated to underwater sports (snorkeling, scuba diving, spearfishing and free-diving). The markings on all our diving products will gradually be replaced.

Why SUBEA? Because: "SUBaquatic Experiences are Amazing"!

For more information: www.subea.com

Weight of the wetsuit (size L)

Weight: 2.4 lbs (with production tolerance).